The Logitec Plus
Coco Mill – CM100
In the past, processing compressed 5 kg coconut blocks was a time-consuming job with a lot of water.
Soaking the pressed 5 kg coconut blocks is a time-consuming work where a lot of water is wasted. The blocks must be sprayed with water for up to 48 hours to achieve a complete soak. The Logitec Plus Coco Mill offers a solution for this. The blocks are wound up effectively in a closed, dust-tight machine.
The blocks are dosed into the machine, whether or not automatically, after which they enter a rotating mill, where water is added.
The blocks absorb the water and the soaked coconut falls off the blocks and is dosed directly on an outfeed conveyor to a possible potting machine or bunker. The moisture of the stripped coconut can be regulated by means of an adjustable run and pause time of the watering system.
- No loss of water
- No spillage of dirty water
- No loss of structure
- Max. volume retention
- Humidity level of ready-to-use coconut is adjustable
- No dust formation thanks to closed machine
Dimensions with 1400mm outfeed belt:
Transport position : 2500 x 1545 x 2065mm
Working position : 4330 x 1545 x 2065mm
Dimensions with 2900mm outfeed belt:
Transport position : 2900 x 1545 x 2065mm
Working position : mm 4660 x 1545 x 2065mm
Weight of the CM100: 1100-1400kg (depending on options)
Max size blocks: 5kg blocks
Max load: around 13 blocks
- Input tray
- Infeed belt semi-automatic
- Outfeed belt
- Big wheels
- Various voltages
- LED lighting inside